Indoor Ramps For Wheelchairs

Indoor ramps for wheelchairs bridge steps and lips inside the home, from sunken lounges to split-level floors and wet rooms. This guide covers the main types, how to plan space and door swings, and how to keep a ramp from becoming a trip hazard.

Read More

Where Are Indoor Wheelchair Ramps Useful At Home?

Indoor ramps smooth out internal room transitions, sunken living areas, hallway thresholds and wet room entries. A step down into a sunken lounge, a raised floor in an extension, a split-level landing in an older house or the lip of a wet room can all stop a wheelchair. Indoor ramps for wheelchairs bridge those changes so the whole ground floor can be used, not just the rooms that happen to be level.

Inside the home the priorities shift. The ramp has to share space with furniture, doors and other people, it must not become a trip hazard, and it should look as if it belongs. This guide covers the main choices and what to think about before buying.

Common Indoor Level Changes

  • Internal door thresholds. A raised strip or change of flooring between rooms, often only a lip.
  • Single steps between rooms. Common in extensions, conservatories and houses built on sloping ground.
  • Split-level floors. A few steps between two halves of a room or between a hall and a living area.
  • Wet room and shower lips. A small upstand at the edge of a shower area.
  • Raised patio or garden door frames. Technically the edge of the house, but often tackled from the inside.

Each one needs a different answer. A lip can often be solved with a slim threshold ramp, while a step or two is a much bigger job.

Threshold, Freestanding And Built In Ramps

For small lips, a threshold ramp in aluminium or rubber is usually enough. Some are adjustable, and some can be trimmed to fit the width of a doorway.

For a single step, freestanding ramps are available in aluminium, rubber and plastic, and some modular systems are designed for indoor use. Folding ramps like those in the product cards can be used indoors on an occasional basis, such as when a visitor comes or when a chair is used only now and then, but a ramp left out permanently in a living space needs to sit flat and be stable.

Where there are several steps or the ramp will be used many times a day, a built-in timber ramp made by a joiner or builder often looks and works better. It can be finished with the same flooring as the room and shaped to suit the space.

How Do You Plan Floor Space And Door Clearances Indoors?

Check that the ramp’s landing area leaves adequate turning room and does not obstruct internal door swings. The chair needs flat space at the top and bottom to stop, turn and line up with doors. If a door opens across the top of the ramp, the user may have to pull the door towards them while perched on a slope, which is awkward and tiring.

Before buying, walk the route with the chair and think about:

  • Could a joiner swap the hinges to the other side of the door, or fit a sliding door instead?
  • Where furniture will need to move to leave a clear path.
  • Whether the ramp will block a radiator, a socket or a cupboard.
  • How other people, including children and anyone with a walking frame, will move around it.

How Can You Prevent Indoor Ramps From Becoming Trip Hazards?

Using contrasting edge markings and chamfered side borders helps other household members navigate around the indoor slope safely. The edges are the biggest risk: a raised lip at the side or end of a ramp can catch a toe, especially at night. Look for ramps with bevelled sides, or consider edge strips in a contrasting colour so the change in level is easy to see.

Good lighting helps. A plug-in night light or