Best Shower Tray Options For Mobility And Safety

By Scott Smith. Last reviewed 21 October 2026.

What Size Shower Tray Do I Need For My Bathroom Space?

Choosing the correct size starts with measuring the floor area where the tray will sit, allowing a few centimetres of clearance around the edges. Measure length and width in centimetres and compare them with standard tray dimensions such as 80 by 80 or 90 by 90. If the space is irregular, sketch the outline on paper and mark the longest straight sections to ensure the tray fits without cutting corners.

How Do These Shower Trays Compare In Size And Material?

The table lists each tray’s dimensions, material type and special features such as anti-slip or heating. Start by noting your bathroom’s floor measurements and then match them to the tray sizes shown.

How Important Is Slip Resistance When Selecting A Shower Tray?

Slip resistance is crucial for staying steady, especially for users with limited mobility. Look for trays with a textured surface or an anti-slip coating and check the coefficient of friction rating if available. A simple test involves wetting the surface and feeling the grip with a bare foot; it should feel noticeably grippy rather than smooth.

Can I Fit A Heated Shower Tray Into An Existing Bathroom Layout?

A heated tray can be added to most layouts provided there is access to an electrical supply that complies with UK wiring regulations. Measure the height of the existing shower base and ensure the heated unit will not exceed the available clearance, typically leaving at least five centimetres for the thermostat and wiring. Verify that the floor can support the extra weight of the heating element.

What Safety Features Should I Look For When Choosing A Shower Tray?

Safety begins with a non-slip surface, which can be identified by a textured finish or an anti-slip coating. Verify that the tray meets British Standards for slip resistance, often indicated by a rating of BSS 1 or higher. Edge design also matters; rounded edges reduce the chance of injury if a user bumps into the tray. For wheelchair users, ensure the tray can support the combined weight of the chair and occupant, typically at least 150 kilograms. Finally, check that any heating element is fitted with a thermostatic control to avoid overheating the floor.

Frequently Asked Questions

How Do I Clean A Stone Effect Shower Tray Without Damaging It?

Use a mild, pH-neutral cleaner and a soft cloth to wipe the surface, avoiding abrasive pads. Rinse thoroughly with water and dry with a non-abrasive towel to prevent streaks.

What Is The Difference Between Acrylic And Composite Shower Trays?

Acrylic trays are lightweight and have a smooth, glossy finish, while composite trays combine materials for added strength and a matte appearance. Choose acrylic for easy handling and composite for higher impact resistance.

Can I Install A Walk In Shower Tray On An Uneven Floor?

Yes, a self-leveling underlay can be applied to create a flat surface before fitting the tray. Measure the highest and lowest points, then use a levelling compound to bring the floor within a tolerance of two centimetres.

How Much Weight Can A Standard Shower Tray Support?

Most standard trays are rated for at least 150 kilograms, enough for a wheelchair user and a caregiver. Check the manufacturer’s specification sheet for the exact load limit before installation.

Do I Need A Special Sealant When Installing A New Shower Tray?

A waterproof silicone sealant designed for bathrooms should be used around the edges to prevent water ingress. Apply a continuous bead and smooth it with a fingertip, ensuring no gaps remain.